SUPER MICRO Computer Server AS1041M-82 Manuel d'utilisateur télécharger pdf (Page 37)

Chapter 5: Advanced Serverboard Setup

5-3

3. Align pin 1 of the CPU with pin 1

of the socket. Once aligned, carefully

place the CPU into the socket. Do not

drop the CPU on the socket, move the

CPU horizontally or vertically or rub the

CPU against the socket or against any

pins of the socket, which may damage

the CPU and/or the socket.

4. With the CPU inserted into the

socket, inspect the four corners of the

CPU to make sure that it is properly in-

stalled and ﬂ ush with the socket. Then,

gently lower the silver CPU retention

plate into place.

5. Carefully press the CPU socket le-

ver down until it locks into its retention

tab. For a dual-CPU system, repeat

these steps to install another CPU into

the CPU#2 socket (and into CPU#2,

#3 and #4 sockets for a quad-CPU

conﬁ guration).

Note: in dual-CPU configurations,

only the CPU1 and CPU2 DIMM slots

are addressable for a maximum of 16

GB memory.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 103 104

Pas de commentaire

SUPER MICRO Computer Server AS1041M-82 Manuel d'utilisateur Page 37