SUPER MICRO Computer SUPERSERVER 6015B-T Manuel d'utilisateur télécharger pdf (Page 128)

D-12

UPERSERVER 6015B-3/6015B-T User's Manual

Adding/Deleting Hotspares

To add a Hotspare:

Note: In order to rebuild a RAID (RAID 0 or RAID 1), you will need to add a new

HDD as a hotspare.

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2. Use the up and down arrow keys to highlight and select the disk you want to

designate as a hotspare, and press <Insert>, and then, press <Enter>.

3. Press Yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Selected drives Menu.

To delete a Hotspare:

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2. Use the up and down arrow keys to highlight and select the Hotspare you want

to delete, and press <delete>, and then, press <Enter>.

3. When the following warning is displayed: "Do you want to delete the hot spare?"

(Yes/No?), press Yes to delete the hotspare you have selected.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 143 144

Pas de commentaire

SUPER MICRO Computer SUPERSERVER 6015B-T Manuel d'utilisateur Page 128