Super-micro-computer P4SCT Manuel d'utilisateur télécharger pdf (Page 83)

Appendix C: Software Installation Instructions

C-7

Creating Arrays

Before creating arrays, make sure the disks for the array are

connected and installed in your system. Note that disks with no

usable space, or disks that are un-initialized are shown in gray and

cannot be used. See Initializing Disk Drives.

To create an array:

1 Turn on your computer and press Ctrl+A when prompted to

access the ARC utility.

2 From the ARC menu, select Array Configuration Utility Main Menu

(ACU) (as shown on the first screen on page C-5).

3 From the ACU menu, select Create Array.

4 Select the disks for the new array and press Insert (as the screen

shown below).

(*Note: To deselect any disk, highlight the disk and press Delete.)

5 Press Enter when both disks for the new array are selected. The

Array Properties menu displays (as the screen shown on the next page).

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

Pas de commentaire

Super-micro-computer P4SCT Manuel d'utilisateur Page 83