Super-micro-computer SUPERSERVER 6014L-T Manuel d'utilisateur télécharger pdf (Page 105)

Appendix C: Software Installation

C-7

Assigning Array Properties

Once you've create a new array, you are ready to assign properties to it.

Caution: Once the array is created and its properties are assigned, you cannot

change the array properties using the ACU.

To assign properties to the new array:

1. In the Array Properties menu, select an array type and press Enter.

Only the available array types will be displayed on the screen. (RAID 0 or RAID 1

requires two drives.)

2. Under the item "Arrays Label", type in a label and press Enter. (The label cannot

contain more than 15 characters.)

3. For RAID 0, select the desired stripe size. Available stripe sizes are 16, 32,

and (the default) 64 KB. It is recommended that you do not change the default

setting.

4. The item: "Create RAID via" allows you to select between the different ways of

creating RAID 0 and RAID 1 arrays.

The following table gives examples of when each is appropriate.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 119 120

Pas de commentaire

Super-micro-computer SUPERSERVER 6014L-T Manuel d'utilisateur Page 105