Super-micro-computer SUPER X7DB8 Manuel d'utilisateur télécharger pdf (Page 103)

Appendix C: The Intel HostRAID Setup Guidelines

C-7

Creating a RAID 5 Set (Parity):

a. Select "Create RAID Volume" from the main menu and press the <Enter> key.

The following screen will appear:

b. Specify a name for the RAID 5 set and press <Enter>.

c. When the Raid Level is highlighted, use the <Up Arrow>, <Down Arrow> keys to

select RAID 5 (Parity) and hit <Enter>.

d. When the Disk item is highlighted, press <Enter> to select the HDD to conﬁ gure

as RAID. The following pop-up screen (*See Note on Page C-3) displays:

e. Use the <Up Arrow>, <Down Arrow> keys to highlight a drive and press <Space>

to select it. A triangle appears to conﬁ rm the selection of the drive.

f. Use the <Up Arrow>, <Down Arrow> keys to select the stripe size, ranged from

4 KB to 128 KB for the RAID 5 array, and hit <Enter>. (*Note: For a server, please

use a lower stripe size, and for a multimedia system, use a higher stripe size. The

default stripe size is 128 KB.)

g. Enter your desired RAID volume capacity and press <Enter> when the capacity

item is highlighted. The default setting is the maximum capacity allowed.

h Press Enter when the Create Volume item is highlighted. A warning message

displays.

i. When asked "Are you sure you want to create this volume (Y/N), press "Y" to

create the RAID volume, or type "N" to go back to the Create Volume menu.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 129 130

Pas de commentaire

Super-micro-computer SUPER X7DB8 Manuel d'utilisateur Page 103