Super-micro-computer SUPER X7DB8 Manuel d'utilisateur télécharger pdf (Page 118)

D-12

X7DB8/X7DBE User's Manual

Adding/Deleting Hotspares

To add a Hotspare:

(*Note: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add a

new HDD as a hotspare.)

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

4. Use the up and down arrow keys to highlight and select the disk you want to

designate as a hotspare, and press <Insert>, and then, press <Enter>.

5. Press Yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Selected drives Menu.

To delete a Hotspare:

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2. Use the up and down arrow keys to highlight and select the Hotspare you

want to delete, and press <delete>, and then, press <Enter>.

3. When the following warning is displayed: "Do you want to delete the hot

spare?" (Yes/No?), press Yes to delete the hotspare you have selected.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 129 130

Pas de commentaire

Super-micro-computer SUPER X7DB8 Manuel d'utilisateur Page 118